Peptide Dosage Calculator for Dogs & Cats: BPC-157, TB-500, GHK-Cu

Peptide Dosage for Dogs and Cats by Weight

This peptide calculator for dogs and cats is designed around body weight. It starts from the dose your veterinarian prescribed, in mcg or mg per kg. Give it your pet's weight in pounds or kilograms, the size of the vial, and the water mixed into it. It answers with the syringe units to draw. The tool is interactive, so the answer updates with every tap.

Important: This tool does not determine what dose your pet should receive. It converts a dose target into a volume. The Low, Mid, and High buttons are presets for the math, not a recommendation. The calculator knows nothing about your pet's health or any medication your pet takes, so treatment decisions belong with a licensed veterinarian. For your pet's safety, check each entry against the label on the vial before you draw.

Need Instructions for the calculator click the button.

Pet Peptide Calculator

Peptide Dosing for Pets

Subcutaneous (SQ) weight-based dosing. Oral bioavailability for most peptides is poorly characterized.

Educational Only - Not Veterinary Advice
What Project Biohacking assesses, including third-party testing and COA documentation, is set out in how each company is rated.

Your Pet:

Dosing is weight-based and applies the same per kilogram to dogs and cats.

Select Peptide:

Peptide Name

Vial Size (mg)

Water Volume (ml)

Pet Weight

Enter exact weight ( kg )

Dose Tier ( mcg/kg )

Syringe Size (ml)

Vial Size (mcg)
0
Doses in Vial
0

Cycle Days (Optional)

Total peptide needed, based on your selected dosing frequency.
Select vial size and water volume to begin --
Total Needed for Cycle: 0 mg

Syringe Visualization

0.0 Units 0.3 ml syringe (max 30 units)

Doses Used

Doses Remaining 0
0% Remaining

Total Doses in Vial: 0

Estimated Days of Supply: 0 days

Dosing Frequency

Start Date

Time of Day

Second Time

Cycle End Date (Optional)

Doses Per Week

Important Dosing varies significantly between peptides and between small and large animals. This calculator uses weight-based dosing. Always consult your veterinarian before administering any peptide to your pet.

What You Need Before You Draw the Dose

This calculation gives you the exact volume to draw, but accuracy depends on using the right supplies and preparing the peptide correctly.

Before measuring your dose, review how to inject peptides to understand syringe setup, measurement, and injection technique. For a broader overview of how peptides are used in veterinary contexts including BPC-157, TB-500, and GHK-Cu, see our guide to peptides for dogs.

YOUR NEXT STEP
BPC-157 peptide vial
VENDORS
Weight-based math needs an accurate vial
Before dosing by body weight, look at the companies we review and pick a supplier you can check.

How to use the pet peptide calculator (step-by-step)

Have three pieces of information ready: your pet's weight, what is in the vial, and the dose from your veterinarian. Then go through the calculator one row at a time.

  1. Your Pet: tap Dog or Cat. The math is the same per kilogram for both animals.
  2. Select Peptide: tap BPC-157, TB-500, GHK-Cu, Pentosan (PPS), KPV, or Custom. Custom opens a box for the name.
  3. Vial Size (mg): five buttons run from 2 mg to 20 mg. If your vial is another size, type it in the Custom mg box.
  4. Water Volume (ml): this is how much water went into the vial at mixing. Buttons cover 1, 2, and 3 ml, and the Custom ml box takes anything else. Which water to use and how to store it is in bacteriostatic water for peptides.
  5. Pet Weight: tap Kilograms (kg) or Pounds (lb), then type the weight. The Small, Medium, Large, and Giant buttons fill in the middle of a size range, so type the scale weight when you have it.
  6. Dose Tier: tap Low, Mid, or High. The three numbers change with the peptide, and Mid is already selected when the page loads. Pentosan has a single button. To use your veterinarian's own number, type it under Custom dose. That box reads the number as mcg per kg. If the number you were given is in mg per kg, multiply it by 1000 first, so 0.1 mg per kg goes in as 100.
  7. Syringe Size (ml): three sizes are listed, 0.3, 0.5, and 1.0 ml. Choose the one your insulin syringe is marked with.

Your answer appears as two numbers: Calculated Dose, in mcg, and the syringe units for that dose. Syringe Visualization fills to the same mark, and Doses in Vial shows how many of those doses the vial holds. A warning comes up if the dose exceeds the capacity of the chosen syringe size.


Three extras are optional. Cycle Days adds up the peptide needed for a full cycle. Supply Tracking counts down the doses left in the vial. Dosing Schedule sets how often and what time, and Download Calendar saves it as a calendar file.


The calculator is built for injections under the skin. It does not work out a dose given by mouth or mixed into food.


This page sizes a dose to an animal's weight. For a vial that is not for a pet, the BPC-157 dosage calculator and the TB-500 dosage calculator take a set dose in mcg and no body weight.


When one vial holds both BPC-157 and TB-500, use the BPC-157 and TB-500 blend calculator. The mg on that label are split between two peptides.

Peptide Dosage Chart for Dogs and Cats

Each chart takes the calculator's Low, Mid, and High tiers and multiplies them by body weight. Every number is a dose in mcg. These dosages are the calculator's presets, laid out so you can find your pet's weight and see where a dose lands. They are not a recommendation. Your veterinarian sets the dose.


The BPC-157 tiers are 2, 5, and 10 mcg per kg. Per pound, that is about 0.9, 2.3, and 4.5 mcg. Cats use the same three tiers, so the cat chart is the dog chart at lighter weights.


TB-500 and GHK-Cu share one set of tiers: 0.05, 0.1, and 0.15 mg per kg. That is 50, 100, and 150 mcg per kg, so these doses run far larger than BPC-157.


The KPV tiers are 0.05, 0.1, and 0.2 mg per kg, which is about 23, 45, and 91 mcg per pound. Pentosan (PPS) has one setting, 3 mg per kg, so it has no chart.


Did your veterinarian prescribe both BPC-157 and TB-500? Run each one through the calculator by itself. It handles one peptide at a time.

BPC-157 Dosage Chart for Dogs by Weight

BPC-157 dose in mcg for a dog at each of the calculator's three tiers.
Dog weight Low, 2 mcg/kg Mid, 5 mcg/kg High, 10 mcg/kg
10 lb (4.5 kg) 9 mcg 23 mcg 45 mcg
20 lb (9.1 kg) 18 mcg 45 mcg 91 mcg
30 lb (13.6 kg) 27 mcg 68 mcg 136 mcg
40 lb (18.1 kg) 36 mcg 91 mcg 181 mcg
50 lb (22.7 kg) 45 mcg 113 mcg 227 mcg
60 lb (27.2 kg) 54 mcg 136 mcg 272 mcg
80 lb (36.3 kg) 73 mcg 181 mcg 363 mcg
100 lb (45.4 kg) 91 mcg 227 mcg 454 mcg

BPC-157 Dosage for Cats

BPC-157 dose in mcg for a cat. The tiers are the same ones the dog chart uses.
Cat weight Low, 2 mcg/kg Mid, 5 mcg/kg High, 10 mcg/kg
6 lb (2.7 kg) 5 mcg 14 mcg 27 mcg
8 lb (3.6 kg) 7 mcg 18 mcg 36 mcg
10 lb (4.5 kg) 9 mcg 23 mcg 45 mcg
12 lb (5.4 kg) 11 mcg 27 mcg 54 mcg
15 lb (6.8 kg) 14 mcg 34 mcg 68 mcg

TB-500 Dosage Chart for Dogs

TB-500 dose in mcg for a dog. GHK-Cu has the same three tiers, so its numbers match. 1000 mcg is 1 mg.
Dog weight Low, 0.05 mg/kg Mid, 0.1 mg/kg High, 0.15 mg/kg
10 lb (4.5 kg) 227 mcg 454 mcg 680 mcg
20 lb (9.1 kg) 454 mcg 907 mcg 1361 mcg
30 lb (13.6 kg) 680 mcg 1361 mcg 2041 mcg
40 lb (18.1 kg) 907 mcg 1814 mcg 2722 mcg
50 lb (22.7 kg) 1134 mcg 2268 mcg 3402 mcg
60 lb (27.2 kg) 1361 mcg 2722 mcg 4082 mcg
80 lb (36.3 kg) 1814 mcg 3629 mcg 5443 mcg
100 lb (45.4 kg) 2268 mcg 4536 mcg 6804 mcg

KPV Dosage for Dogs per Pound

KPV dose in mcg for a dog. Per pound, the three tiers come to about 23, 45, and 91 mcg.
Dog weight Low, 0.05 mg/kg Mid, 0.1 mg/kg High, 0.2 mg/kg
10 lb (4.5 kg) 227 mcg 454 mcg 907 mcg
20 lb (9.1 kg) 454 mcg 907 mcg 1814 mcg
30 lb (13.6 kg) 680 mcg 1361 mcg 2722 mcg
40 lb (18.1 kg) 907 mcg 1814 mcg 3629 mcg
50 lb (22.7 kg) 1134 mcg 2268 mcg 4536 mcg
60 lb (27.2 kg) 1361 mcg 2722 mcg 5443 mcg
80 lb (36.3 kg) 1814 mcg 3629 mcg 7257 mcg
100 lb (45.4 kg) 2268 mcg 4536 mcg 9072 mcg

When the Draw Is Too Small to Measure

Small animals and strong mixes make tiny draws. Take a 10 lb cat on the BPC-157 Mid tier. The vial is 5 mg, mixed with 2 ml of water. The dose is 23 mcg and the calculator shows 0.9 units. Less than one unit is too small for anyone to measure accurately.


A weaker mix turns the same dose into a bigger draw. Put that dose in 3 ml of water with 2 mg of peptide, and the draw grows to 3.4 units.


If your number is too small to read on the syringe, do not eyeball it. Ask your veterinarian about more dilution before you draw.


Big dogs can have the opposite problem. Say a 50 lb dog is on the TB-500 Mid tier and the vial is 10 mg, mixed with 2 ml of water. The draw is 45.4 units, more than the 30 units on the smallest syringe size. The warning stays up until you switch to the 0.5 ml size.

How the Calculator Turns Weight Into Syringe Units

Here is the math behind the answer, in four steps.


  1. Conversion to kilograms: a weight in pounds is divided by 2.2046.
  2. Dose: kilograms times the dose per kg. A tier written in mg per kg is multiplied by 1000 to put it in mcg.
  3. Strength of the mix: the vial size in mg times 1000, divided by the water volume in ml. The answer is mcg per ml.
  4. Units: the dose divided by the strength, times 100. Insulin syringes marked U-100 carry 100 units in every ml.


Take a 50 lb dog on the BPC-157 Mid tier of 5 mcg per kg. Fifty pounds is 22.68 kg, and 22.68 times 5 comes to 113 mcg. The vial is 5 mg and the water is 2 ml, so every ml of the mix holds 2500 mcg. That makes the draw 0.045 ml, which the calculator shows as 4.5 units.


The example is here for the arithmetic only. Your dog's dose is your veterinarian's to set.


A fuller walk-through is in peptide dosage math explained. If peptides are new to you, start with what peptides are.

Where these compounds come from

Dose accuracy also depends on the vial being what the label says, and two of the companies Project Biohacking tracks publish documentation you can check before ordering. Ascension Peptides runs dual-method HPLC-UV-MS testing with public per-batch certificates tied to lot numbers, covered in how Ascension documents each batch.


Apollo Peptide Sciences takes a different route. It runs blind Janoshik purity testing on every batch, and the detail is in how Apollo's blind batch testing works.


BioEdge Research Labs is one of the eight companies in the Project Biohacking vendor directory, and it sells its compounds for laboratory research use only. None of them is approved for use in animals. The Project Biohacking BioEdge Research Labs discount code is PROBIO15, applied at checkout for 15 percent off.


Ameano Peptides lists several of the compounds this calculator covers, including BPC-157 and GHK-Cu. Like every company in the directory, it sells them for research use only, and nothing it sells is approved for use in animals. Any decision about an animal belongs with a veterinarian. The Project Biohacking Ameano Peptides discount code is PROBIO, taking 10 percent off at checkout.

Medical Disclaimer: This calculator is for educational purposes and dose conversion only. It does not provide medical advice and does not establish a veterinarian-client relationship. Always consult a licensed veterinarian before using any peptide or injectable product with animals. Use sterile technique and properly sourced materials as directed by a professional.

FAQ for Pet Peptide Calculator

How do I work out a BPC-157 dose for my dog by weight?

Multiply your dog's weight in kg by the dose per kg from your veterinarian. The calculator's BPC-157 tiers are 2, 5, and 10 mcg per kg, so a 50 lb dog on the Mid tier comes to 113 mcg. The dog chart on this page covers 10 lb to 100 lb.

Is the BPC-157 dose for a cat figured the same way?

Yes. The calculator runs the same math per kilogram for a cat as for a dog. A 10 lb cat on the Mid tier comes to 23 mcg. Cats are light, so the draw is often very small.

How much KPV per pound does the calculator use for a dog?

The KPV tiers are 0.05, 0.1, and 0.2 mg per kg. Per pound, that works out to about 23, 45, and 91 mcg. Your veterinarian picks the dose, and the calculator turns it into syringe units.

Can I type a dose in mg per kg into the Custom dose box?

Not as written. The Custom dose box reads every number as mcg per kg. Multiply a dose in mg per kg by 1000 before you type it, so 0.1 mg per kg is entered as 100.

Why does it convert pounds to kilograms?

The dose tiers are written per kilogram. When you enter pounds, the calculator divides by 2.2046 to get kilograms, then does the rest of the math.

My result is extremely small. Is that normal?

It can be. A light animal and a strong mix make a tiny draw, sometimes under one unit. Do not guess at it. Ask your veterinarian about more dilution so the draw is big enough to read.

Can this tool tell me what dose my dog should take?

No. It only does the math. Low, Mid, and High are presets, and the dose itself has to come from your veterinarian.